Productor II Toroid Coil Winder

900A Toroid Coil Winder

Features

The Model 900A Toroid Winder has many features not found on simpler machines including choice of automatic sector winding,

or manually controlled CW or CCW core rotation by a rocker switch. Two potentiometers set the loading and winding speeds

and the machine is operated by a hand or foot switch, or by a variable speed foot pedal. Standard equipment is a dual preset

counter for loading and winding counts. An internal footage counter is automatically connected when loading wire. There is a jockey-stick core

positioner for moving the whole core rotator assembly left or right and forward and back. A core jog lever for CW or CCW core positioning.

Winding Speeds to 2000 TPM.

The all new taping head tapes coils up to 7-112" in diameter and 3" high.

It takes magazines in tape widths from 318" to 314" or 10 to 2Omm.

The new tape de-spooler is of novel construction with no moving parts.

The tape spool is dropped into the open-top hopper and the tape spool revolves on itself as tape is taken off the spool.

There is no assembly to betaken apart between spool changes. Spools of up to 12" diameter with any size spool cores

are used without adaptors, including cloth tapes which have very small centers.

The despooler sits to the rear of the machine where it is out of the way for lifting up the top plate of the machine for access.

An SCR controlled DC motor of 314 HP gives adequate reserves of power for all heads. .