New Page 1

SIMPLEX Winder Machine

Features

The all new Simplex Winder is designed as a basic hand-guided winding machine, to wind an infinite
variety of winding forms and nylon bobbins, with a minimum of set-up time required.
Using the Simplex, the operator can usually layer wind a coil by hand, almost as well
as with a traverse equipped machine, and better, when winding the heavier wires.

Specifications

Powerful 3/4 HP permanent magnet DC motor with SCR motor control.
13 1/2" between spindle and tailstock with standard 26" long bars.
Any length between centers available with longer bars.
14" swing diameter around spindle with tailstock bars.
Easily changed from dual Flat Belt Pulleys to higher torque timing belt pulley combination.
Reversible spindle: Choice of 1/2" or 5/8" shaft with flat for holding set-screw.
Preset add-subtract Electronic Counter in easily seen position. Other multi preset counters available.
Dynamic braking for almost instant stopping.
Optional Electric Brake for maintaining spindle lock when pedal is released. Can be switched off when not needed.
Quickly adjustable Tailstock available with various ball bearing mounted ends, 2" or 3" retraction.
Eye shield for operator safety.
1/2" Jacobs Chuck fits on 1/2" or 5/8" round spindle with flat.
Simple and rugged construction.
Inexpensive, and U.S. made for easy access to parts, accessories and service.